What are the usage methods and maintenance precautions of electric screwdrivers? - Company News - Sudong intelligent

4008-338-598

What are the usage methods and maintenance precautions of electric screwdrivers?

2019-11-21 11:00:00 0

  What are the usage methods and maintenance precautions for electric screwdrivers? In fact, the electric screwdriver we often say is electric screwdriver. It is based on ordinary screwdrivers and driven by electricity, which greatly improves the work effect. However, the electric screwdriver is in use. If you don't pay attention to mastering its usage and maintenance skills, its service life will not be too long. So today I will share with you the use method and maintenance precautions of electric screwdrivers!

  


1. How to use and maintain the electric screwdriver.

1. The electric screwdriver must be maintained on time. When the torque of the electric screwdriver is too small to satisfy the use, it should be stopped immediately and replaced with a larger torque electric screwdriver;

2. When the electric screwdriver does not turn, the head is easy to fall off, the speed of the screwdriver is not smooth or the screwdriver will not stop automatically, it should be sent for repair in time to ensure that it can be used next time;

3. When pulling out the electric screwdriver and the plug of the matching electric box, the base of the plug should be used as the force point, and no force should be used to pull the wire;

4. It is strictly forbidden to hit the electric screwdriver;

5. The electric screwdriver shakes a lot during the working process, so it must be stopped to avoid further damage to the electric screwdriver;

6. Press the start button. When the electric screwdriver cannot be turned due to the too small torque, it should be noted that the condition should not exceed ten seconds to avoid causing the electric motor in the electric screwdriver;

7. Pay attention to the use of electric screwdrivers. Screws of different specifications should correspond to electric screwdrivers with different torque ranges.

2. The precautions for the use of electric screwdrivers are summarized in the following 10 points.

1. It is strictly forbidden to hit the electric screwdriver (beware of collision or falling, otherwise it will produce motor noise and screwdriver shaking).

2. When pulling out the connecting plug of the electric screwdriver and the supporting controller, the base of the plug should be used as the force point, and the wire should not be pulled with force to avoid damage to the contact plug.

3. The electric screwdriver must be stopped when it shakes a lot during work, so as not to damage the electric screwdriver more deeply, and notify the management personnel to arrange maintenance.

4. When there is an abnormal problem with the electric screwdriver, promptly notify the administrator and send it to the maintenance personnel for repair. The general abnormalities are: the screwdriver does not rotate, the screwdriver speed is not smooth, the screwdriver head is easy to fall off or shake, and the screwdriver will not stop automatically.

5. When the torque of the electric screwdriver is too small to satisfy the use, stop using it, and inform the management in time to arrange to replace the electric screwdriver with a high torque.

6. When the start button is pressed, the electric screwdriver cannot be rotated due to too little torque, it should be noted that this state should be controlled within 10 seconds to avoid damage to the motor of the electric screwdriver.

7. Before plugging in the power, the switch should be positioned in the off state. Pay attention to whether the power supply voltage is suitable for the machine. When the electric screwdriver is not in use or the power is cut off, the plug should be opened.

8. When using, do not set the torque adjustment too large.

9. When replacing the screwdriver bit, be sure to pull the power plug away from the power socket and turn off the power of the screwdriver.

10. During use, do not drop or hit the electric screwdriver.

  


  The above descriptions of the use of electric screwdrivers and maintenance precautions are summarized here, so we must master the correct method in the daily process of using electric screwdrivers, and align and maintain them after use in order to better extend the use.